New leg training ideas

Here are three leg training machines that are a little different to ones I’ve used elsewhere. Filmed at Watson Gym Equipment stand at BodyPower, and many thanks to them. Here are my thoughts on the relative merits of each.

Check out the video: click here then select the first video on my video wall.

This particular 45° leg press has a feature I’ve not seen before in that the footplates can be joined together as is most common, or can be separated with different resistance on each side. This gives the chance to have differential resistance if one of your legs is weaker than the other. With footplates disconnected you can press both legs in sync or alternating. Using in sync gives you the ability to check if one leg has a greater range of movement then the other (then work on that one). Alternating enables you to put more mental focus in the press on just the one pressing leg. An excellent piece of equipment.

The Leverage Squat Machine is the closest machine I’ve found to reproducing the traditional back squat but adding some safety features, concepts that will enable some people to get far more benefit. For those with shoulder flexibility issues, the positioning of the hands on a part of the machine forward of the body is a big bonus. It’s far enough forward to be non-weight bearing so leg resistance isn’t reduced. And for those a little concerned with balance and stability, this movement gives all the benefits and feel of the back squat without the possibility of tilting or ultimately falling in any direction. As you can’t lean towards one side, any unwanted unequal forces down the spine and posterior chain are removed. Meaning you can go heavier and torture those quads, hams and glutes more!

Finally, the Vertical Press. The position of the lower body here is it’s unique feature. By pressing with the weight exactly vertically, the full resistance of the weight is borne by the legs especially the quads at all times – you are working with 100% of the gravity component. With the weight of the carriage known, the full force of the weight needs to be pressed giving maximum focus with precision on resistance amount with no lateral element. I found it works the legs in a direct way that isn’t fully possible in any other position.

I don’t think your upper leg training should be exclusively on any of these machines / but add them to your leg day mix to discover new and efficient ways of training those pins safely.

Remember to check out the video to see all three machines in action!